Hull 800
Basic data
| Category: | Budgetboat |
| Year of construction: | Unknown |
| Length: | 800 cm |
| width: | 250 cm |
| Depth: | 40 cm |
| Material: | Steel |
| Motorization: | None |
| Berth: |
Zaandam, Netherlands
|
Specifications
Hull 800 – Steel Hull for Construction Project or Renovation
Are you looking for a project boat or a hull to build entirely to your own specifications? Then this Hull 800 offers an interesting foundation. This steel hull is made available by the municipality of Zaanstad and has been seized by enforcement. As a result, there is limited information available about the history and technical condition of the vessel. The boat is offered as found, without additional documentation or maintenance records.
General Specifications
- Internal number 97
- Brand: Hull
- Type: 800
- Length: 8.00 meters
- Width: 2.50 meters
- Draft: 0.40 meters
- Material: Steel
- VAT Status: Paid
- Registration: Not registered
- Documentation: Not available
- Condition: Hull, inspection and complete construction required
- Trailer included: No
Construction and Material
The hull of this Hull 800 is made of steel, known for its robustness and durability. Steel boats are popular among DIY enthusiasts and shipbuilders due to the possibilities for customization and renovation. The dimensions of 8 meters in length and 2.5 meters in width make this hull suitable for various applications, such as a sloop, cabin boat, or workboat, depending on the chosen construction.
With a draft of only 40 centimeters, the vessel is suitable for use on shallow inland waters, such as canals, ditches, lakes, and ponds. This makes the hull interesting for those looking for a boat for recreational use in urban or rural sailing areas.
Current Condition and Points of Attention
This is a hull that still needs to be fully constructed. There is no information available about the last time the vessel was taken out of the water or when antifouling was last applied. Potential buyers are advised to thoroughly inspect the hull for structural integrity, rust formation, and other possible defects before proceeding with the purchase.
There is no engine, technical installations, or interior components present. However, this offers the opportunity to outfit the vessel entirely according to one's own insight and intended use. Consider the choice of an inboard or outboard motor, electric or combustion propulsion, and the layout of the deck or cabin.
Use and Sailing Area
According to the limited information available, the vessel was previously used on inland waters, including canals, ditches, lakes, ponds, and rivers. The boat was used for pleasure cruising and day trips. Due to its dimensions and low freeboard, the hull is particularly suitable for calm waters.
Possibilities for Construction
The Hull 800 offers a wide range of possibilities for construction. Some examples of possible applications are:
- Sloop or Tender: Ideal for day trips and recreational use on inland waters.
- Cabin Boat: With a construction, the hull can be transformed into an overnight boat.
- Workboat or Transport Boat: Suitable for functional use, for example, for transport or maintenance work on the water.
Origin and Status
The hull was seized by the enforcement of the municipality of Zaanstad. This means that the boat comes from an enforcement procedure and that no additional information is available about the technical condition, maintenance, or usage history. Potential buyers are advised to inspect the boat prior to purchase to get a good understanding of the vessel's condition.
Summary
This Hull 800 offers a solid foundation for those looking for a construction project or renovation boat. With its steel construction and ample dimensions, the vessel is suitable for various applications on inland waters. Due to the lack of documentation and the current condition, the hull is particularly interesting for experienced DIY enthusiasts, shipbuilders, or fans of self-build projects.
Schedule
- Viewing Day: Saturday, May 17, between 9 and 11 AM
- Auction Date: Monday, May 19, from 8:00 PM
- Pickup: Saturday, May 24, between 9 and 11 AM based on a time slot
VIEWING DAY INFORMATION
- The viewing day of this Hull 800 is on Saturday 17 May 2025 van 09:00 until 11:00 in Zaandam (NL).
ADDITIONAL INFORMATION
- We advise making use of the viewing day.
- The boat is in the water.
- This boat is delivered without a trailer.
- the given measurements are approximate measurements.
- there are no keys to the boat present.
- There is no boat crane or trailer ramp available at the storage location where you pick up the boat.
- This boat is sold under general auction conditions.
- This concerns a public auction, which means that the purchase cannot be returned based on the legal right of withdrawal.
| Brand | Hull |
| Type | 800 |
| Length | 800 |
| Width | 250 |
| Depth | 40 |
| Year of construction | - |
| Material | Steel |
| Last antifouling treatment | - |
| Is a trailer included? | No |
Hull 800 – Steel Hull for Construction Project or Renovation
Are you looking for a project boat or a hull to build entirely to your own specifications? Then this Hull 800 offers an interesting foundation. This steel hull is made available by the municipality of Zaanstad and has been seized by enforcement. As a result, there is limited information available about the history and technical condition of the vessel. The boat is offered as found, without additional documentation or maintenance records.
General Specifications
- Internal number 97
- Brand: Hull
- Type: 800
- Length: 8.00 meters
- Width: 2.50 meters
- Draft: 0.40 meters
- Material: Steel
- VAT Status: Paid
- Registration: Not registered
- Documentation: Not available
- Condition: Hull, inspection and complete construction required
- Trailer included: No
Construction and Material
The hull of this Hull 800 is made of steel, known for its robustness and durability. Steel boats are popular among DIY enthusiasts and shipbuilders due to the possibilities for customization and renovation. The dimensions of 8 meters in length and 2.5 meters in width make this hull suitable for various applications, such as a sloop, cabin boat, or workboat, depending on the chosen construction.
With a draft of only 40 centimeters, the vessel is suitable for use on shallow inland waters, such as canals, ditches, lakes, and ponds. This makes the hull interesting for those looking for a boat for recreational use in urban or rural sailing areas.
Current Condition and Points of Attention
This is a hull that still needs to be fully constructed. There is no information available about the last time the vessel was taken out of the water or when antifouling was last applied. Potential buyers are advised to thoroughly inspect the hull for structural integrity, rust formation, and other possible defects before proceeding with the purchase.
There is no engine, technical installations, or interior components present. However, this offers the opportunity to outfit the vessel entirely according to one's own insight and intended use. Consider the choice of an inboard or outboard motor, electric or combustion propulsion, and the layout of the deck or cabin.
Use and Sailing Area
According to the limited information available, the vessel was previously used on inland waters, including canals, ditches, lakes, ponds, and rivers. The boat was used for pleasure cruising and day trips. Due to its dimensions and low freeboard, the hull is particularly suitable for calm waters.
Possibilities for Construction
The Hull 800 offers a wide range of possibilities for construction. Some examples of possible applications are:
- Sloop or Tender: Ideal for day trips and recreational use on inland waters.
- Cabin Boat: With a construction, the hull can be transformed into an overnight boat.
- Workboat or Transport Boat: Suitable for functional use, for example, for transport or maintenance work on the water.
Origin and Status
The hull was seized by the enforcement of the municipality of Zaanstad. This means that the boat comes from an enforcement procedure and that no additional information is available about the technical condition, maintenance, or usage history. Potential buyers are advised to inspect the boat prior to purchase to get a good understanding of the vessel's condition.
Summary
This Hull 800 offers a solid foundation for those looking for a construction project or renovation boat. With its steel construction and ample dimensions, the vessel is suitable for various applications on inland waters. Due to the lack of documentation and the current condition, the hull is particularly interesting for experienced DIY enthusiasts, shipbuilders, or fans of self-build projects.
Schedule
- Viewing Day: Saturday, May 17, between 9 and 11 AM
- Auction Date: Monday, May 19, from 8:00 PM
- Pickup: Saturday, May 24, between 9 and 11 AM based on a time slot
VIEWING DAY INFORMATION
- The viewing day of this Hull 800 is on Saturday 17 May 2025 van 09:00 until 11:00 in Zaandam (NL).
ADDITIONAL INFORMATION
- We advise making use of the viewing day.
- The boat is in the water.
- This boat is delivered without a trailer.
- the given measurements are approximate measurements.
- there are no keys to the boat present.
- There is no boat crane or trailer ramp available at the storage location where you pick up the boat.
- This boat is sold under general auction conditions.
- This concerns a public auction, which means that the purchase cannot be returned based on the legal right of withdrawal.
| Brand | Hull |
| Type | 800 |
| Length | 800 |
| Width | 250 |
| Depth | 40 |
| Year of construction | - |
| Material | Steel |
| Last antifouling treatment | - |
| Is a trailer included? | No |
