Jongert Trewes Commodore
Basic data
| Category: | Sailboat |
| Year of construction: | 1967 |
| Length: | 940 cm |
| width: | 260 cm |
| Depth: | 140 cm |
| Material: | Steel |
| Motorization: | None |
| Berth: |
Makkum, Netherlands
|
Specifications
Jongert Trewes Commodore 1967 – Classic Steel Long Keel Yacht with Potential
The Jongert Trewes Commodore from 1967 is a classic sailing yacht with a rich maritime history. This model is designed as a traditional long keel yacht and built by the renowned Dutch shipyard Jongert, known for its solid constructions and timeless designs. With a length of 9.40 meters and a width of 2.60 meters, this vessel offers a solid foundation for sailors looking for a characterful boat with potential for restoration or personalization.
Construction and Dimensions
The hull of the Trewes Commodore is entirely made of steel, contributing to the robustness and durability of the ship. The draft is 1.40 meters, making the ship suitable for both inland and coastal waters. The clearance height is 12 meters, allowing it to pass under most bridges. Inside, there is a standing height of 1.80 meters, providing reasonable freedom of movement in the interior.
Interior and Accommodation
The interior offers four fixed berths, making the ship suitable for small groups or families. The interior space is equipped with a simple stove and a water tank with a capacity of 50 liters. The inside of the ship shows slight damage to the woodwork, requiring attention from the future owner. The boat has been stored indoors for over ten years, necessitating a thorough cleaning and inspection during the viewing day.
Technical Condition and Maintenance
The boat was last taken out of the water for maintenance in 2024, during which an antifouling treatment was also performed. The mast has been recently sanded but not yet installed. The current engine is unreliable and does not start, meaning a new or refurbished diesel engine of at least 15 hp is necessary for use. However, this also offers the opportunity to install a modern and efficient drive that suits the new owner's preferences.
Sailing Equipment and Deck Equipment
The condition of the sails is described as poor, meaning replacement or thorough repair is needed. On deck, the ship is equipped with a manual anchor winch, an anchor with chain, fenders and lines, a sprayhood, and a teak deck. This equipment forms a good basis for further outfitting and customization. The teak parts on the deck contribute to the classic appearance of the ship but may require maintenance.
Navigation and Instrumentation
In terms of navigation, the ship is equipped with a compass and a temperature gauge. For longer trips or modern navigation needs, additional equipment will be necessary.
Berth and Registration
The boat is not registered. The current berth is an indoor storage.
Summary
The Jongert Trewes Commodore from 1967 is a classic steel sailing yacht with a solid foundation and characteristic appearance. The ship requires attention in several areas, including motorization, sailing equipment, interior finishing, and cleaning. However, for enthusiasts of classic yachts and DIYers, this ship offers an opportunity to build and furnish a traditional sailing yacht according to their own vision.
ADDITIONAL INFORMATION
- The auction of this lot has been canceled at the owner's instruction.
- The boat is in a shed.
- This boat is sold without a trailer.
- This boat is sold under general auction conditions.
- This concerns a public auction, which means that the purchase cannot be returned based on the legal right of withdrawal.
| Brand | Jongert |
| Type | Trewes Commodore |
| Length | 940 |
| Width | 260 |
| Depth | 140 |
| Clearance height | 12000 |
| Year of construction | 1967 |
| Material | Steel |
| Number of sleeping places (fixed) | 4 |
| Standing height indoors | 180 |
| Last antifouling treatment | 2024 |
| Cooker | |
| Water tank capacity in liters | 50 |
| Anchor(s) | 1 |
| Anchor attachment | Chain |
| Windlass | Hand |
| Fenders and lines | |
| Sprayhood | |
| Teak deck |
| Temperature Gauge |
| State of the sails | Bad |
Jongert Trewes Commodore 1967 – Classic Steel Long Keel Yacht with Potential
The Jongert Trewes Commodore from 1967 is a classic sailing yacht with a rich maritime history. This model is designed as a traditional long keel yacht and built by the renowned Dutch shipyard Jongert, known for its solid constructions and timeless designs. With a length of 9.40 meters and a width of 2.60 meters, this vessel offers a solid foundation for sailors looking for a characterful boat with potential for restoration or personalization.
Construction and Dimensions
The hull of the Trewes Commodore is entirely made of steel, contributing to the robustness and durability of the ship. The draft is 1.40 meters, making the ship suitable for both inland and coastal waters. The clearance height is 12 meters, allowing it to pass under most bridges. Inside, there is a standing height of 1.80 meters, providing reasonable freedom of movement in the interior.
Interior and Accommodation
The interior offers four fixed berths, making the ship suitable for small groups or families. The interior space is equipped with a simple stove and a water tank with a capacity of 50 liters. The inside of the ship shows slight damage to the woodwork, requiring attention from the future owner. The boat has been stored indoors for over ten years, necessitating a thorough cleaning and inspection during the viewing day.
Technical Condition and Maintenance
The boat was last taken out of the water for maintenance in 2024, during which an antifouling treatment was also performed. The mast has been recently sanded but not yet installed. The current engine is unreliable and does not start, meaning a new or refurbished diesel engine of at least 15 hp is necessary for use. However, this also offers the opportunity to install a modern and efficient drive that suits the new owner's preferences.
Sailing Equipment and Deck Equipment
The condition of the sails is described as poor, meaning replacement or thorough repair is needed. On deck, the ship is equipped with a manual anchor winch, an anchor with chain, fenders and lines, a sprayhood, and a teak deck. This equipment forms a good basis for further outfitting and customization. The teak parts on the deck contribute to the classic appearance of the ship but may require maintenance.
Navigation and Instrumentation
In terms of navigation, the ship is equipped with a compass and a temperature gauge. For longer trips or modern navigation needs, additional equipment will be necessary.
Berth and Registration
The boat is not registered. The current berth is an indoor storage.
Summary
The Jongert Trewes Commodore from 1967 is a classic steel sailing yacht with a solid foundation and characteristic appearance. The ship requires attention in several areas, including motorization, sailing equipment, interior finishing, and cleaning. However, for enthusiasts of classic yachts and DIYers, this ship offers an opportunity to build and furnish a traditional sailing yacht according to their own vision.
VIEWING DAY INFORMATION
- The viewing day of this Jongert Trewes Commodore is on Saturday 23 August 2025 van 10:00 until 12:00 in Makkum (NL).
ADDITIONAL INFORMATION
- <b>The auction of this lot has been canceled at the owner's instruction.</b>
- The boat is in a shed.
- This boat is sold without a trailer.
- This boat is sold under general auction conditions.
- This concerns a public auction, which means that the purchase cannot be returned based on the legal right of withdrawal.
| Brand | Jongert |
| Type | Trewes Commodore |
| Length | 940 |
| Width | 260 |
| Depth | 140 |
| Clearance height | 12000 |
| Year of construction | 1967 |
| Material | Steel |
| Number of sleeping places (fixed) | 4 |
| Standing height indoors | 180 |
| Last antifouling treatment | 2024 |
| Cooker | |
| Water tank capacity in liters | 50 |
| Anchor(s) | 1 |
| Anchor attachment | Chain |
| Windlass | Hand |
| Fenders and lines | |
| Sprayhood | |
| Teak deck |
| Temperature Gauge |
| State of the sails | Bad |
