Island Plastics 24
Données de base
| Catégorie: | Voilier |
| Année de construction: | 1978 |
| Longueur: | 870 cm |
| largeur: | 285 cm |
| Profondeur: | 150 cm |
| Matériau: | Polyester |
| Motorisation: | Yanmar |
| Poste d'amarrage: |
Gorinchem, Pays-Bas
|
Spécifications
Island Plastics 24 from 1978 – Polyester Sailboat with Potential
General Characteristics of the Island Plastics 24
The Island Plastics 24 is a polyester sailboat from 1978 with a length of 8.70 meters and a width of 2.85 meters. The draft is 1.50 meters, making the boat suitable for both inland waters and sheltered coastal areas. The clearance height of 9 meters allows it to pass under most bridges, making the boat usable in various waterways such as lakes, ponds, and rivers. The interior headroom is 1.70 meters, contributing to onboard comfort.
Island Plastics 24 now in the online auction. Everyone can bid until December 15, 2025.
Construction and Material Use
The hull of the Island Plastics 24 is made of polyester, a commonly used material in recreational boating due to its strength and relatively low maintenance. The mast is made of wood, giving the ship a traditional character. There are four fixed berths, with the possibility of creating two additional sleeping places. This makes the boat suitable for short trips with multiple passengers.
Interior and Amenities
Inside, the boat is equipped with a dining area and a refrigerator. There is a manual toilet with direct discharge into open water. For heating, a hot air system is installed. The interior space is unfinished and offers room for further customization according to personal preference. The inside of the boat still needs refurbishment, providing opportunities for personalization.
Engine and Propulsion
The Island Plastics 24 is equipped with a Yanmar YS12 inboard diesel engine with a power of 12 hp. The engine is operational according to the listing, but currently not connected. It is a single-cylinder engine from the same year as the boat, 1978. The engine is started electrically. The steering system is also operational but not yet connected.
Sailing Equipment
The boat has one wooden mast and four sails. The condition of the sails is described as reasonable. The sailing equipment allows for navigation on both inland waters and more open waters. The boat is designed as a full-fledged sailboat.
Maintenance and Technical Condition
The boat was last taken out of the water in 2024. The antifouling treatment dates from 2022. No signs of osmosis have been detected. The top of the boat still needs to be made watertight and painted. Various parts are included in the sale, including a new steering console, a sea railing, loose wood material, and various floorboards.
History and Use
The previous owner started refurbishing the boat but could not complete the project due to passing away. The current owner took over the project, but due to health issues, completing the renovation has not been possible. The boat has been used in the past for recreational boating and day trips on inland waters, lakes, and rivers.
Documentation and Registration
The boat is not registered, and no documentation is available.
Conclusion
The Island Plastics 24 offers a foundation for those looking for a classic polyester sailing yacht with room for personal finishing. The boat is equipped with a working engine and steering system, although these need to be connected. With a solid hull, reasonable sails, and various included parts, this ship is suitable for a handy DIY enthusiast looking for a project with potential. The boat is usable on various waters and offers space for multiple passengers.
INFORMATIONS SUPPLéMENTAIRES
- Nous vous conseillons de profiter de la journée de visite.
- Le bateau est dans l'eau.
- Ce bateau est livré sans remorque.
- Ce bateau est vendu sous les conditions générales de vente aux enchères.
- Il s'agit d'une vente aux enchères publiques, ce qui signifie que l'achat ne peut pas être retourné en fonction du droit de rétractation légal.
| Marque | Island Plastics |
| Type | 24 |
| Longueur | 870 |
| Largeur | 285 |
| Profondeur | 150 |
| Hauteur de passage | 9000 |
| Année de construction | 1978 |
| Matériau | Polyester |
| Nombre de places de couchage (fixes) | 4 |
| Nombre de places de couchage (supplémentaires) | 2 |
| Hauteur sous plafond à l'intérieur | 170 |
| Dernier traitement anti-salissure | 2022 |
| Salle à manger | |
| Congélateur | |
| Est-ce que l'évacuation des toilettes se fait directement dans l'eau libre | Oui |
| Chauffage | CV |
| Annexe | Non |
| Une remorque est-elle incluse? | Non |
| Nombre de moteurs | 1 |
| Le moteur est-il opérationnel | Le moteur est opérationnel |
| Commencez à taper | Électrique |
| Type de moteur | Inboard |
| Marque moteur | Yanmar |
| Moteur de modèle | YS12 |
| Puissance (ch) | 12 |
| Nombre de cylindres | 1 |
| Année de construction du moteur | 1978 |
| Carburant | Diesel |
| Propulseur d'étrave | s.o. |
| Nombre de mâts | 1 |
| Matériau de mât | Bois |
| Nombre de voiles | 4 |
| état des voiles | Raisonnable |
Island Plastics 24 from 1978 – Polyester Sailboat with Potential
General Characteristics of the Island Plastics 24
The Island Plastics 24 is a polyester sailboat from 1978 with a length of 8.70 meters and a width of 2.85 meters. The draft is 1.50 meters, making the boat suitable for both inland waters and sheltered coastal areas. The clearance height of 9 meters allows it to pass under most bridges, making the boat usable in various waterways such as lakes, ponds, and rivers. The interior headroom is 1.70 meters, contributing to onboard comfort.
Island Plastics 24 now in the online auction. Everyone can bid until December 15, 2025.
Construction and Material Use
The hull of the Island Plastics 24 is made of polyester, a commonly used material in recreational boating due to its strength and relatively low maintenance. The mast is made of wood, giving the ship a traditional character. There are four fixed berths, with the possibility of creating two additional sleeping places. This makes the boat suitable for short trips with multiple passengers.
Interior and Amenities
Inside, the boat is equipped with a dining area and a refrigerator. There is a manual toilet with direct discharge into open water. For heating, a hot air system is installed. The interior space is unfinished and offers room for further customization according to personal preference. The inside of the boat still needs refurbishment, providing opportunities for personalization.
Engine and Propulsion
The Island Plastics 24 is equipped with a Yanmar YS12 inboard diesel engine with a power of 12 hp. The engine is operational according to the listing, but currently not connected. It is a single-cylinder engine from the same year as the boat, 1978. The engine is started electrically. The steering system is also operational but not yet connected.
Sailing Equipment
The boat has one wooden mast and four sails. The condition of the sails is described as reasonable. The sailing equipment allows for navigation on both inland waters and more open waters. The boat is designed as a full-fledged sailboat.
Maintenance and Technical Condition
The boat was last taken out of the water in 2024. The antifouling treatment dates from 2022. No signs of osmosis have been detected. The top of the boat still needs to be made watertight and painted. Various parts are included in the sale, including a new steering console, a sea railing, loose wood material, and various floorboards.
History and Use
The previous owner started refurbishing the boat but could not complete the project due to passing away. The current owner took over the project, but due to health issues, completing the renovation has not been possible. The boat has been used in the past for recreational boating and day trips on inland waters, lakes, and rivers.
Documentation and Registration
The boat is not registered, and no documentation is available.
Conclusion
The Island Plastics 24 offers a foundation for those looking for a classic polyester sailing yacht with room for personal finishing. The boat is equipped with a working engine and steering system, although these need to be connected. With a solid hull, reasonable sails, and various included parts, this ship is suitable for a handy DIY enthusiast looking for a project with potential. The boat is usable on various waters and offers space for multiple passengers.
INFORMATIONS SUR LA JOURNéE DE VISITE
- La journée de visite de cette Island Plastics 24 est activé samedi 13 décembre 2025 van 10:00 jusqu'à 12:00 dans Gorinchem (NL).
INFORMATIONS SUPPLéMENTAIRES
- Nous vous conseillons de profiter de la journée de visite.
- Le bateau est dans l'eau.
- Ce bateau est livré sans remorque.
- Ce bateau est vendu sous les conditions générales de vente aux enchères.
- Il s'agit d'une vente aux enchères publiques, ce qui signifie que l'achat ne peut pas être retourné en fonction du droit de rétractation légal.
| Marque | Island Plastics |
| Type | 24 |
| Longueur | 870 |
| Largeur | 285 |
| Profondeur | 150 |
| Hauteur de passage | 9000 |
| Année de construction | 1978 |
| Matériau | Polyester |
| Nombre de places de couchage (fixes) | 4 |
| Nombre de places de couchage (supplémentaires) | 2 |
| Hauteur sous plafond à l'intérieur | 170 |
| Dernier traitement anti-salissure | 2022 |
| Salle à manger | |
| Congélateur | |
| Est-ce que l'évacuation des toilettes se fait directement dans l'eau libre | Oui |
| Chauffage | CV |
| Annexe | Non |
| Une remorque est-elle incluse? | Non |
| Nombre de moteurs | 1 |
| Le moteur est-il opérationnel | Le moteur est opérationnel |
| Commencez à taper | Électrique |
| Type de moteur | Inboard |
| Marque moteur | Yanmar |
| Moteur de modèle | YS12 |
| Puissance (ch) | 12 |
| Nombre de cylindres | 1 |
| Année de construction du moteur | 1978 |
| Carburant | Diesel |
| Propulseur d'étrave | s.o. |
| Nombre de mâts | 1 |
| Matériau de mât | Bois |
| Nombre de voiles | 4 |
| état des voiles | Raisonnable |
