Tender 580 3D Printed
Basic data
| Category: | Motorboat |
| Year of construction: | 2025 |
| Length: | 580 cm |
| width: | 240 cm |
| Depth: | 45 cm |
| Material: | Other material |
| Motorization: | None |
| Berth: |
Ermelo, Netherlands
|
Specifications
tender 580 3d printed with circular hull
what kind of boat is this?
this tender 580 3d printed is a modern launch measuring approximately 5.80 metres in length and around 2.40 metres in beam. she has a draught of approximately 45 centimetres and a stated interior headroom of 199 centimetres. this gives the boat a practical size for relaxed day trips on inland waters, canals, ditches, lakes, ponds and rivers.
the hull has a v-shaped bottom and is made from recycled plastic. this tender was not built in the traditional way using a conventional mould, but was constructed layer by layer using large-scale 3d printing technology. this gives her a distinctive appearance and makes her interesting to anyone who, when buying a boat, considers not only dimensions and comfort but also the materials used and the production method.
the boat was built in 2025. she weighs approximately 650 kilograms. the steering position is outdoors and operated with a steering wheel. a trailer is not included. bear this in mind when considering transport, storage or launching the boat.
tender 580 3d printed now in the online auction. everyone can place bids until 14 December 2026.
what makes her special?
the most striking feature of this tender is the combination of a traditional launch shape with an innovative production method. the hull is entirely printed from recycled plastic. this gives existing plastic a new application in a watercraft. at the end of her service life, the material can be processed again, depending on the possibilities offered by the relevant recycling stream.
the 3d-printed hull has its own surface texture and a contemporary appearance. the boat is intended for relaxed recreational use and is well suited to a day on the water with family or friends. she can be used on various Dutch waterways, including canals, ditches, lakes and ponds. on wider or flowing rivers, it is advisable to check the local conditions and weather forecast carefully in advance.
the consignor describes her as a sturdy and environmentally friendly boat. objectively, she is a 2025 showroom model that, according to the information provided, is in good condition. it has been stated that she was taken out of the water for maintenance in 2026. no information has been provided about a final antifouling treatment. carefully inspect the hull, interior, steering and available equipment yourself during the viewing day.
is this boat suitable for you?
this tender may suit you if you are looking for a compact launch for recreational use and value the distinctive story behind the hull. she is suitable for relaxed trips where comfort, visibility and ease of use are more important than high speed or sporty boating. the outdoor steering position provides a direct seat at the helm and keeps the controls easy to oversee.
because the boat has been used as a showroom model, her usage history is only briefly described. it has been stated that she was used for presentation purposes and recreational boating. therefore, check the condition of the finish, upholstery, flooring and steering during the viewing day.
what should you look out for when buying a boat?
when buying a boat, it is important not to focus only on its appearance. check the hull for damage, deformation and signs of use. also inspect whether the steering moves smoothly and whether all visible components are present. if desired, measure the available space on board and compare her dimensions with the location where you intend to store the boat.
the absence of a trailer also affects the total costs and practical planning. find out what transport options are available and how you intend to launch her. the stated draught of 45 centimetres makes her interesting for many of the shallower Dutch waterways, but her actual suitability also depends on loading and local navigation regulations.
is this a suitable second-hand boat?
anyone looking to buy a second-hand boat often seeks a combination of purchase price, ease of use and insight into the boat's condition. this tender is not a traditional used launch with a long boating history, but a 2025 showroom model. that distinction is important. her history is briefly described and indicates that she was used for presentations and recreational boating.
the stated condition is good, but an assessment from a distance does not replace your own inspection. take your time during the viewing day to examine the boat inside and out. pay attention to the finish of the printed hull, the condition of the seating, flooring, steering wheel and any technical components. if you do not have sufficient experience, it may be wise to bring someone with nautical knowledge.
which boat-buying tips are important?
one of the most important boat-buying tips is to decide in advance what you will actually use the boat for. for short trips on sheltered inland waters, this tender may be a suitable choice. also consider in advance the desired number of passengers, storage space, boating areas and how you will transport or store her.
it is also advisable to check the available documentation and information about the technical equipment during the viewing day. compare the stated dimensions with your berth and pay attention to the air draught if you intend to visit canals and pass under bridges. also ask yourself how much time and budget you have available for maintenance and use. this will help you make a well-considered choice that goes beyond the modern appearance of the 3d-printed hull.
how can you assess her during the viewing day?
during the viewing day, you can inspect the tender up close. take the opportunity to carefully examine her hull, interior, steering and overall finish. look for any damage and check whether the practical layout suits your plans. the viewing day is also the right time to ask questions about her history as a showroom model and the equipment included.
this boat is being auctioned through boatauction. the prospective buyer must decide for themselves whether her dimensions, material, configuration and condition are suitable for the intended use. with her circular plastic hull, compact launch shape and distinctive production method, the tender 580 3d printed offers an alternative for anyone looking for a special boat for relaxed recreational boating.
VIEWING DAY INFORMATION
- The viewing day of this Tender 580 3D Printed is on Saturday 12 December 2026 van 10:00 until 12:00 in Ermelo (NL).
ADDITIONAL INFORMATION
- We advise making use of the viewing day.
- The boat is in a shed.
- It concerns a VAT boat, the bid price is increased by 21% VAT.
- This boat is sold without a trailer.
- This boat is sold under general auction conditions.
- This concerns a public auction, which means that the purchase cannot be returned based on the legal right of withdrawal.
| Brand | Tender |
| Type | 580 3D Printed |
| Length | 580 |
| Width | 240 |
| Depth | 45 |
| Year of construction | 2025 |
| Material | Other material |
| Standing height indoors | 199 |
| Last antifouling treatment | - |
| Hull shape | V-bottom |
| Control | Wheel |
| Location control | Outside |
| Rudder | N/A |
| Is a trailer included? | No |
| Weight (kg) | 650 |
tender 580 3d printed with circular hull
what kind of boat is this?
this tender 580 3d printed is a modern launch measuring approximately 5.80 metres in length and around 2.40 metres in beam. she has a draught of approximately 45 centimetres and a stated interior headroom of 199 centimetres. this gives the boat a practical size for relaxed day trips on inland waters, canals, ditches, lakes, ponds and rivers.
the hull has a v-shaped bottom and is made from recycled plastic. this tender was not built in the traditional way using a conventional mould, but was constructed layer by layer using large-scale 3d printing technology. this gives her a distinctive appearance and makes her interesting to anyone who, when buying a boat, considers not only dimensions and comfort but also the materials used and the production method.
the boat was built in 2025. she weighs approximately 650 kilograms. the steering position is outdoors and operated with a steering wheel. a trailer is not included. bear this in mind when considering transport, storage or launching the boat.
tender 580 3d printed now in the online auction. everyone can place bids until 14 December 2026.
what makes her special?
the most striking feature of this tender is the combination of a traditional launch shape with an innovative production method. the hull is entirely printed from recycled plastic. this gives existing plastic a new application in a watercraft. at the end of her service life, the material can be processed again, depending on the possibilities offered by the relevant recycling stream.
the 3d-printed hull has its own surface texture and a contemporary appearance. the boat is intended for relaxed recreational use and is well suited to a day on the water with family or friends. she can be used on various Dutch waterways, including canals, ditches, lakes and ponds. on wider or flowing rivers, it is advisable to check the local conditions and weather forecast carefully in advance.
the consignor describes her as a sturdy and environmentally friendly boat. objectively, she is a 2025 showroom model that, according to the information provided, is in good condition. it has been stated that she was taken out of the water for maintenance in 2026. no information has been provided about a final antifouling treatment. carefully inspect the hull, interior, steering and available equipment yourself during the viewing day.
is this boat suitable for you?
this tender may suit you if you are looking for a compact launch for recreational use and value the distinctive story behind the hull. she is suitable for relaxed trips where comfort, visibility and ease of use are more important than high speed or sporty boating. the outdoor steering position provides a direct seat at the helm and keeps the controls easy to oversee.
because the boat has been used as a showroom model, her usage history is only briefly described. it has been stated that she was used for presentation purposes and recreational boating. therefore, check the condition of the finish, upholstery, flooring and steering during the viewing day.
what should you look out for when buying a boat?
when buying a boat, it is important not to focus only on its appearance. check the hull for damage, deformation and signs of use. also inspect whether the steering moves smoothly and whether all visible components are present. if desired, measure the available space on board and compare her dimensions with the location where you intend to store the boat.
the absence of a trailer also affects the total costs and practical planning. find out what transport options are available and how you intend to launch her. the stated draught of 45 centimetres makes her interesting for many of the shallower Dutch waterways, but her actual suitability also depends on loading and local navigation regulations.
is this a suitable second-hand boat?
anyone looking to buy a second-hand boat often seeks a combination of purchase price, ease of use and insight into the boat's condition. this tender is not a traditional used launch with a long boating history, but a 2025 showroom model. that distinction is important. her history is briefly described and indicates that she was used for presentations and recreational boating.
the stated condition is good, but an assessment from a distance does not replace your own inspection. take your time during the viewing day to examine the boat inside and out. pay attention to the finish of the printed hull, the condition of the seating, flooring, steering wheel and any technical components. if you do not have sufficient experience, it may be wise to bring someone with nautical knowledge.
which boat-buying tips are important?
one of the most important boat-buying tips is to decide in advance what you will actually use the boat for. for short trips on sheltered inland waters, this tender may be a suitable choice. also consider in advance the desired number of passengers, storage space, boating areas and how you will transport or store her.
it is also advisable to check the available documentation and information about the technical equipment during the viewing day. compare the stated dimensions with your berth and pay attention to the air draught if you intend to visit canals and pass under bridges. also ask yourself how much time and budget you have available for maintenance and use. this will help you make a well-considered choice that goes beyond the modern appearance of the 3d-printed hull.
how can you assess her during the viewing day?
during the viewing day, you can inspect the tender up close. take the opportunity to carefully examine her hull, interior, steering and overall finish. look for any damage and check whether the practical layout suits your plans. the viewing day is also the right time to ask questions about her history as a showroom model and the equipment included.
this boat is being auctioned through boatauction. the prospective buyer must decide for themselves whether her dimensions, material, configuration and condition are suitable for the intended use. with her circular plastic hull, compact launch shape and distinctive production method, the tender 580 3d printed offers an alternative for anyone looking for a special boat for relaxed recreational boating.
VIEWING DAY INFORMATION
- The viewing day of this Tender 580 3D Printed is on Saturday 12 December 2026 van 10:00 until 12:00 in Ermelo (NL).
ADDITIONAL INFORMATION
- We advise making use of the viewing day.
- The boat is in a shed.
- It concerns a VAT boat, the bid price is increased by 21% VAT.
- This boat is sold without a trailer.
- This boat is sold under general auction conditions.
- This concerns a public auction, which means that the purchase cannot be returned based on the legal right of withdrawal.
| Brand | Tender |
| Type | 580 3D Printed |
| Length | 580 |
| Width | 240 |
| Depth | 45 |
| Year of construction | 2025 |
| Material | Other material |
| Standing height indoors | 199 |
| Last antifouling treatment | - |
| Hull shape | V-bottom |
| Control | Wheel |
| Location control | Outside |
| Rudder | N/A |
| Is a trailer included? | No |
| Weight (kg) | 650 |
