Motorboat 1050
Basic data
| Category: | Motorboat |
| Year of construction: | 1980 |
| Length: | 1050 cm |
| width: | 298 cm |
| Depth: | 95 cm |
| Material: | Steel |
| Motorization: | Mercedes |
| Berth: |
lelystad, Netherlands
|
Specifications
Motorboat 1050 – Steel Motorboat from 1980 with Functional Equipment
General Features and Dimensions
The Motorboat 1050 is a steel motorboat with a length of 10.50 meters and a width of 2.98 meters. The draft is 0.95 meters, making the boat suitable for various inland waters, lakes, ponds, and rivers. The clearance height of 2.60 meters allows it to pass under most bridges. Inside, there is a headroom of 2.00 meters, providing comfortable freedom of movement in the interior.
This motorboat was built in 1980 at the Wieringen shipyard in Germany and was purchased in Heeg in 2002. The hull is designed in a chine form, contributing to stability and sailing characteristics. Steering is done via a steering wheel and is dual, meaning it can be controlled both inside and outside. The rudder is single.
Motorboat 1050 now in the online auction. Everyone can bid until November 24, 2025.
Interior and Accommodation
The accommodation of the Motorboat 1050 is designed for both short and longer stays on board. There are two fixed berths available, with the possibility of three additional berths. The interior space is equipped with a dining area, mattresses, a refrigerator, and a stove. The kitchen is not yet fully finished, and the 100-liter water tank is currently not connected. The onboard toilet is electric and discharges directly into open water.
Heating is not present, which may be relevant for use in colder seasons. The boat is suitable for various purposes such as day trips, pleasure cruising, vacations, weekend stays, and even as temporary living space.
Engine and Technical Installation
The boat is equipped with a Mercedes 2.22 inboard diesel engine with a power of 58 hp, distributed over four cylinders. The engine is electrically started and functional. The cruising speed is around 9 km/h, with a maximum speed of approximately 12 km/h. The engine is from the same year as the boat, namely 1980. The fuel tank has a capacity of 200 liters.
Regarding measuring instruments, there is an oil pressure gauge and a temperature gauge. The tachometer is currently not functional. The electrical installation consists of an alternator, inverter, voltmeter, shore power connection, and a solar panel. There are two batteries on board with a total capacity of 360 Ah. The electrical systems operate on 12V and 220V.
Equipment and Deck Equipment
On deck, the Motorboat 1050 is equipped with various pieces of equipment that contribute to comfort and functionality. There is a bimini for shade on sunny days, as well as davits for hanging a dinghy. Pulpit and stern seats provide seating on deck. Furthermore, fenders and lines are available for mooring, as well as a swim platform and swim ladder for easy access to the water.
The boat has one anchor attached with a line. The boat weighs approximately 8,500 kilograms, which contributes to stability while sailing.
Maintenance and Condition
The Motorboat 1050 was last taken out of the water for maintenance in 2024. In the same year, the antifouling treatment was also carried out. There are some known defects, including an unfinished kitchen, a non-connected water tank, and some minor technical or cosmetic issues.
The boat is not registered, but the VAT has been paid. The current owner has mainly used the boat for recreational purposes, including day trips, vacations, and weekend getaways. The boat has also been used as temporary living space.
User Experience and History
The Motorboat 1050 has a history dating back to the 1980s, with use on various inland waters. The current owner has had the boat since 2002 and sailed with acquaintances in the 1990s. The boat was built in Germany and has since been used on lakes, ponds, and rivers.
Conclusion
The Motorboat 1050 offers a functional base for those looking for a steel motorboat with sufficient space and equipment for recreational use. With a classic build and practical layout, this boat is suitable for a variety of sailing experiences on inland waters. The available facilities and technical installations make it possible to stay comfortably on board, with room for further finishing and personalization.
ADDITIONAL INFORMATION
- We advise making use of the viewing day.
- The boat is on the shore.
- This boat is delivered without a trailer.
- This boat is sold under general auction conditions.
- This concerns a public auction, which means that the purchase cannot be returned based on the legal right of withdrawal.
| Brand | Motorboat |
| Type | 1050 |
| Length | 1050 |
| Width | 298 |
| Depth | 95 |
| Clearance height | 260 |
| Year of construction | 1980 |
| Material | Steel |
| Number of sleeping places (fixed) | 2 |
| Number of sleeping places (extra) | 3 |
| Standing height indoors | 200 |
| Last antifouling treatment | 2024 |
| Hull shape | Chine |
| Control | Wheel |
| Location control | Inside + Outside |
| Rudder | Single |
| Separate dining area | |
| Fridge | |
| Cooker | |
| Curtains | |
| Water tank capacity in liters | 100 |
| Toilet | Electric |
| Does the toilet drain directly into the open water | Yes |
| Heating | N/A |
| Weight (kg) | 8500 |
| Anchor(s) | 1 |
| Anchor attachment | Line |
| Windlass | N/A |
| Bimini | |
| Davits | |
| Push- and pulpit(s) | |
| Fenders and lines | |
| Swimming platform | |
| Swimming ladder |
| Number of engines | 1 |
| Is the engine operational | The engine is operational |
| Start typing | Electric |
| Maximum speed | kilometers per hour | 12 |
| Engine type | Inboard |
| Brand motor | Mercedes |
| Model engine | 2.22 |
| Power (hp) | 58 |
| Number of cylinders | 4 |
| Year of construction of the engine | 1980 |
| Fuel | Diesel |
| Tank capacity in liters | 200 |
| Oil Pressure Gauge | |
| Temperature Gauge | |
| Number of batteries present | 2 |
| Total battery capacity | 360 |
| Alternator | |
| Inverter | |
| Voltmeter | |
| Shore power | |
| Solar panel | |
| 12V | |
| 220V |
Motorboat 1050 – Steel Motorboat from 1980 with Functional Equipment
General Features and Dimensions
The Motorboat 1050 is a steel motorboat with a length of 10.50 meters and a width of 2.98 meters. The draft is 0.95 meters, making the boat suitable for various inland waters, lakes, ponds, and rivers. The clearance height of 2.60 meters allows it to pass under most bridges. Inside, there is a headroom of 2.00 meters, providing comfortable freedom of movement in the interior.
This motorboat was built in 1980 at the Wieringen shipyard in Germany and was purchased in Heeg in 2002. The hull is designed in a chine form, contributing to stability and sailing characteristics. Steering is done via a steering wheel and is dual, meaning it can be controlled both inside and outside. The rudder is single.
Motorboat 1050 now in the online auction. Everyone can bid until November 24, 2025.
Interior and Accommodation
The accommodation of the Motorboat 1050 is designed for both short and longer stays on board. There are two fixed berths available, with the possibility of three additional berths. The interior space is equipped with a dining area, mattresses, a refrigerator, and a stove. The kitchen is not yet fully finished, and the 100-liter water tank is currently not connected. The onboard toilet is electric and discharges directly into open water.
Heating is not present, which may be relevant for use in colder seasons. The boat is suitable for various purposes such as day trips, pleasure cruising, vacations, weekend stays, and even as temporary living space.
Engine and Technical Installation
The boat is equipped with a Mercedes 2.22 inboard diesel engine with a power of 58 hp, distributed over four cylinders. The engine is electrically started and functional. The cruising speed is around 9 km/h, with a maximum speed of approximately 12 km/h. The engine is from the same year as the boat, namely 1980. The fuel tank has a capacity of 200 liters.
Regarding measuring instruments, there is an oil pressure gauge and a temperature gauge. The tachometer is currently not functional. The electrical installation consists of an alternator, inverter, voltmeter, shore power connection, and a solar panel. There are two batteries on board with a total capacity of 360 Ah. The electrical systems operate on 12V and 220V.
Equipment and Deck Equipment
On deck, the Motorboat 1050 is equipped with various pieces of equipment that contribute to comfort and functionality. There is a bimini for shade on sunny days, as well as davits for hanging a dinghy. Pulpit and stern seats provide seating on deck. Furthermore, fenders and lines are available for mooring, as well as a swim platform and swim ladder for easy access to the water.
The boat has one anchor attached with a line. The boat weighs approximately 8,500 kilograms, which contributes to stability while sailing.
Maintenance and Condition
The Motorboat 1050 was last taken out of the water for maintenance in 2024. In the same year, the antifouling treatment was also carried out. There are some known defects, including an unfinished kitchen, a non-connected water tank, and some minor technical or cosmetic issues.
The boat is not registered, but the VAT has been paid. The current owner has mainly used the boat for recreational purposes, including day trips, vacations, and weekend getaways. The boat has also been used as temporary living space.
User Experience and History
The Motorboat 1050 has a history dating back to the 1980s, with use on various inland waters. The current owner has had the boat since 2002 and sailed with acquaintances in the 1990s. The boat was built in Germany and has since been used on lakes, ponds, and rivers.
Conclusion
The Motorboat 1050 offers a functional base for those looking for a steel motorboat with sufficient space and equipment for recreational use. With a classic build and practical layout, this boat is suitable for a variety of sailing experiences on inland waters. The available facilities and technical installations make it possible to stay comfortably on board, with room for further finishing and personalization.
VIEWING DAY INFORMATION
- The viewing day of this Motorboat 1050 is on Saturday 22 November 2025 van 10:00 until 12:00 in lelystad (NL).
ADDITIONAL INFORMATION
- We advise making use of the viewing day.
- The boat is on the shore.
- This boat is delivered without a trailer.
- This boat is sold under general auction conditions.
- This concerns a public auction, which means that the purchase cannot be returned based on the legal right of withdrawal.
| Brand | Motorboat |
| Type | 1050 |
| Length | 1050 |
| Width | 298 |
| Depth | 95 |
| Clearance height | 260 |
| Year of construction | 1980 |
| Material | Steel |
| Number of sleeping places (fixed) | 2 |
| Number of sleeping places (extra) | 3 |
| Standing height indoors | 200 |
| Last antifouling treatment | 2024 |
| Hull shape | Chine |
| Control | Wheel |
| Location control | Inside + Outside |
| Rudder | Single |
| Separate dining area | |
| Fridge | |
| Cooker | |
| Curtains | |
| Water tank capacity in liters | 100 |
| Toilet | Electric |
| Does the toilet drain directly into the open water | Yes |
| Heating | N/A |
| Weight (kg) | 8500 |
| Anchor(s) | 1 |
| Anchor attachment | Line |
| Windlass | N/A |
| Bimini | |
| Davits | |
| Push- and pulpit(s) | |
| Fenders and lines | |
| Swimming platform | |
| Swimming ladder |
| Number of engines | 1 |
| Is the engine operational | The engine is operational |
| Start typing | Electric |
| Maximum speed | kilometers per hour | 12 |
| Engine type | Inboard |
| Brand motor | Mercedes |
| Model engine | 2.22 |
| Power (hp) | 58 |
| Number of cylinders | 4 |
| Year of construction of the engine | 1980 |
| Fuel | Diesel |
| Tank capacity in liters | 200 |
| Oil Pressure Gauge | |
| Temperature Gauge | |
| Number of batteries present | 2 |
| Total battery capacity | 360 |
| Alternator | |
| Inverter | |
| Voltmeter | |
| Shore power | |
| Solar panel | |
| 12V | |
| 220V |
