Kotter 23
Basic data
| Category: | Motorboat |
| Year of construction: | Unknown |
| Length: | 700 cm |
| width: | 200 cm |
| Depth: | 80 cm |
| Material: | Wood |
| Motorization: | None |
Specifications
The Bresk is a very nice model boat.
It is a boat made of wood and this was last out of the water for maintenance: Winter 2020/21. In the pre-year of 2020 it was last put in the antifouling.
Known defects: This is a wooden boat with epoxy mats below the waterline. Especially after winter storage and launching there is always water coming in. This usually settles after some time in addition there is overdue paintwork. This boat is really for the enthusiast a great ship where you attract many people. Open sailing and still dry and out of the wind.
VIEWING DAY
The viewing day for this cutter Bresk 20 is on Saturday, April 24, 2021 between 10 and 12 hours in Amsterdam (Netherlands).
| Brand | Kotter |
| Type | 23 |
| Length | 700 |
| Width | 200 |
| Depth | 80 |
| Clearance height | 185 |
| Year of construction | 1970 |
| Material | Wood |
| Standing height indoors | 180 |
| Hull shape | Roundbilge |
| Control | Wheel |
| Location control | Outside |
| Rudder | Single |
| Life buoy | |
| Boat cover(s) |
| Start typing | Electric |
| Engine type | Inboard |
| Brand motor | Farymann |
| Model engine | 30S 30 0003 N 2500 |
| Power (hp) | 30 |
| Number of cylinders | 2 |
| Year of construction of the engine | 1976 |
| Fuel | Diesel |
| Consumption | 2 |
| Oil Pressure Gauge |
The Bresk is a very nice model boat.
It is a boat made of wood and this was last out of the water for maintenance: Winter 2020/21. In the pre-year of 2020 it was last put in the antifouling.
Known defects: This is a wooden boat with epoxy mats below the waterline. Especially after winter storage and launching there is always water coming in. This usually settles after some time in addition there is overdue paintwork. This boat is really for the enthusiast a great ship where you attract many people. Open sailing and still dry and out of the wind.
VIEWING DAY
The viewing day for this cutter Bresk 20 is on Saturday, April 24, 2021 between 10 and 12 hours in Amsterdam (Netherlands).
| Brand | Kotter |
| Type | 23 |
| Length | 700 |
| Width | 200 |
| Depth | 80 |
| Clearance height | 185 |
| Year of construction | 1970 |
| Material | Wood |
| Standing height indoors | 180 |
| Hull shape | Roundbilge |
| Control | Wheel |
| Location control | Outside |
| Rudder | Single |
| Life buoy | |
| Boat cover(s) |
| Start typing | Electric |
| Engine type | Inboard |
| Brand motor | Farymann |
| Model engine | 30S 30 0003 N 2500 |
| Power (hp) | 30 |
| Number of cylinders | 2 |
| Year of construction of the engine | 1976 |
| Fuel | Diesel |
| Consumption | 2 |
| Oil Pressure Gauge |
